Exhaust oil content of micro-oil screw air compressor

The exhaust oil content of micro-oil screw air compressor is a key performance index, which directly affects the use effect of air compressor and the safety of subsequent equipment. The following is a detailed explanation of the exhaust oil content of the micro-oil screw air compressor:

standard of oil content:

generally speaking, the exhaust oil content of the micro-oil screw air compressor should not exceed 5ppm (one part per million). However, in practical applications, this value may be affected by many factors.

According to publicly released information, the discharge oil content of micro-oil screw air compressors usually contains 30 to 40 milligrams of oil per cubic meter of compressed air. This range can be converted to ppm units, that is, 30ppm to 40ppm. However, please note that this is a rough range, and the specific oil content may vary depending on the equipment model, brand and conditions of use.

factors affecting the oil content:

performance of the oil separation core: If the oil separation core is damaged, such as damaged or perforated, its oil and gas separation function will fail, resulting in a large amount of cooling oil not being separated and discharged together with the gas.

The working status of the oil return pipeline: If the oil return pipeline is blocked, broken or incorrectly installed, the oil accumulated at the bottom of the oil separation core cannot be transported back to the compressor, resulting in oil during the exhaust process.

Control of system pressure: If the system pressure control is too low, the centrifugal force in the separator will be less than the centrifugal force required by the work, making the oil and gas separation incomplete.

The amount of cooling oil added in the compressor: If the cooling oil added is too much and exceeds the range of the compressor, the gas will involve the excess cooling oil in the gas discharge, resulting in excessive oil content in the discharge gas.

how to reduce the exhaust oil content:

regularly check and maintain the oil separation core and oil return pipeline to ensure that they are in good working condition.

Reasonably control the system pressure to avoid the adverse effects of too low or too high pressure on oil and gas separation.

In strict accordance with the requirements of the compressor to add the right amount of cooling oil, to avoid too much or too little oil on the exhaust oil content.

In general, the exhaust oil content of the micro-oil screw air compressor is a complex and important indicator, which is affected by many factors. In order to ensure the normal operation of the air compressor and the safety of subsequent equipment, it is necessary to regularly inspect and maintain the air compressor, and strictly control various operating parameters.