2026-04-09Views：
The scale of air compressor manufacturers has gradually expanded. But after all, it is a kind of machine equipment, need to do regular maintenance work, so the next for everyone to talk about the maintenance cycle of air compressor.
Annual maintenance
during the annual maintenance of the air compressor, it is necessary to replace the lubricating oil and the filter element of the oil and gas separator, replace the filter element of the air filter, oil filter and safety valve calibration, check the elastic coupling, check the cooling fan, clean the automatic drain valve, and supplement or replace the motor lubricating grease.
Monthly maintenance
the air compressor still needs to be maintained once a month. During the maintenance, the cooler of the air compressor should be checked. If it is too dirty, it needs to be properly cleaned, all wires should be checked and tightened, AC contactor contacts should be checked, dust on the surface of the motor suction port and the shell surface should be cleaned, oil return filter should be cleaned, and air compressor settings and operation should be checked for consistency.
Daily maintenance
of course, daily maintenance is the top priority. It is necessary to check the oil level, empty filter element and coolant level, hose and all pipe joints, consumable parts, etc.
Small air compressors with oil and without oil have their own advantages and disadvantages, which is better depends on the specific application scenarios and needs. The advantage of the small oil air compressor is that it has better lubrication and cooling effect, which can provide longer service life and higher compression effect
The application of air compressor in forging industry is mainly reflected in the following aspects: power source of pneumatic forging hammer: air compressor provides power for pneumatic forging hammer to ensure that it can strike metal with appropriate strength and speed, so as to achieve accurate metal shaping. This is
Today, with the rapid development of air compressor technology, single-stage screw water lubrication technology has gradually become the new darling of the industry with its high efficiency and environmental protection characteristics. When it comes to the leader of this technology, the water-lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly a bright.
"30kg" usually means 30kg force (kgf), while "pressure" is usually expressed in pascals (Pa) or megapascals (MPa). The following is a detailed unit conversion process: 1. Clear unit definition kg force (kgf):1kg force is equal to the mass of 1kg
It is a common problem that the air inside the air compressor contains moisture, which is usually due to the water vapor in the air condensing into water during the compression process. In order to solve this problem, the following measures can be taken to remove the moisture in the air compressor: Install a drain valve:
There is a certain relationship between the flow and pressure of compressed air, but this relationship is not a simple linear relationship, but is affected by many factors. Definition of the basic relationship between 1. flow and pressure: flow: the volume of the output rate of the compressor system
In the choice of air compressor, frequency and frequency conversion have their own advantages, the specific choice depends on the actual use of conditions, budget and working environment and other factors. The following is a detailed comparison of the main advantages and disadvantages of the two: Power frequency air compressor Advantages: Simple structure: Control system of power frequency air compressor
The oil-free standard for compressed air is based primarily on ISO 8573-1. According to this standard, the highest grade of oil-free compressed air, Class 0, requires an oil content of less than 0.01 mg/m & sup3;. In addition, different application areas have oil-free standards for compressed air.
Q: air compressor what enterprises use? A: air compressor is a general machinery, a wide range of applications. Note: The items used in our lives, special gases (oxygen, argon, nitrogen, etc.), are available during production and processing.
If the air compressor is an oil-free screw machine, there is no need to consider the pressure vessel inside the machine, because it does not have an oil and gas separation cylinder. If it is a fuel injection screw machine, the oil and gas separation cylinder inside belongs to the pressure vessel. Generally, it is necessary to handle the notice of commencement and the inspection of the pot.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
