Safety Operation Regulations and Precautions of Air Compressor

Air compressor safety operation procedures and precautions are essential to ensure the normal operation of equipment and personnel safety. The following are some key safety procedures and precautions:

safety operation procedures:

check before operation: ensure the safety environment around the air compressor and check whether there are hidden dangers such as gas leakage. At the same time, check whether the heat sink of the device is blocked to ensure its normal operation. It is also necessary to check whether each pipeline and interface is loose or leaking and deal with it in time.

Familiar with the equipment: the operator must be familiar with the general structure and performance of the equipment, and it is strictly prohibited to use the equipment with super performance.

Start-up preparation: before starting up, check the shift change record, check the safety protection device, check whether the oil level is normal, whether the cooling water is connected, whether the exhaust gate valve is in the open state, and whether the relief valve is in the closed state.

After the boot operation: after the boot to open the relief valve. For overtemperature, should immediately shut down and check the cooling system; for overpressure, should quickly close the intake valve and shut down to check the pressure regulating device; for water cut, should immediately shut down to prevent the equipment from overheating; for abnormal noise, should immediately shut down and check whether there are foreign bodies or damaged parts inside the equipment.

Inspection and maintenance: stick to the post, do not leave the post without authorization, and carefully do a good job of inspection work and operation records. Safety protection devices and safety protection facilities shall not be dismantled or stopped at will. The safety valve shall be tested once a month and recorded by the air compression station.

Note:

regular inspection and maintenance: air compressor is a mechanical equipment, with the increase of use time, its parts may have problems. Therefore, regular maintenance and repair are required to ensure that the equipment is in good condition. During maintenance, it is important to ensure that the equipment has been completely shut down and carried out by professional staff.

Exhaust and heat dissipation: For air compressors, ensure that they are effectively exhausted and communicate with the atmosphere, and pay attention to their heat dissipation to avoid internal icing or overheating.

Select the appropriate model: the model of the air compressor should meet the gas demand of the enterprise and ensure the reasonable design. Enterprises should determine their own needs before purchasing air compressors.

Environment and safety: For large air compressors, pay special attention to the safety of electricity during operation, and ensure that the operating environment is clean and tidy, preferably in a low temperature environment. At the same time, to prevent the equipment overload operation, so as not to affect the efficiency and operation safety.

In summary, strict compliance with safe operation procedures and precautions is essential to ensure the normal operation of the air compressor and the safety of personnel. Enterprises should strengthen the training of operators, improve their safety awareness and operation skills, in order to reduce the occurrence of accidents.