2026-04-10Views：
In the industrial field, the normal range of compressor pressure will vary according to different application requirements and compressor models. In general, the pressure of compressed air for industrial use is usually between 0.7MPa and 1.0MPa. However, the specific pressure depends on different industrial applications. For example, in the process of metal processing and plastic product production, compressed air is used as a power source, and its pressure is usually within this range. In addition, according to the relevant national standards, the normal pressure range of industrial compressed air is 0.6~0.8MPa.
However, there is also a view that the normal range of the compressor outlet pressure is 0.7~1.2Mpa. In addition, according to the different discharge pressure, the compressor can be roughly divided into low pressure, medium pressure, high pressure and ultra-high pressure compressor. The discharge pressure of the low-pressure compressor is less than 1.0MPa, the discharge pressure of the medium-pressure compressor is between 1.0MPa and 10MPa, the discharge pressure of the high-pressure compressor is between 10MPa and 100MPa, and the discharge pressure of the ultra-high-pressure compressor is greater than 100MPa.
In general, choosing the right compressed air pressure needs to take into account the actual needs of the plant and the specific application. At the same time, when using compressed air, it is also necessary to strictly abide by relevant safety regulations to ensure the safety of operators and equipment.
The failure of the air compressor may be caused by a variety of reasons. The following are some common failures and their solutions: 1. exhaust temperature and high temperature sensor failure: It is recommended to replace the temperature sensor. Lubricating oil problem: the lubricating oil specification is not correct
The production of cigarette factory is mainly divided into three links: silk making, rolling and packaging, and almost every link is inseparable from compressed air. The wire injection machine needs compressed air to transport tobacco, the cigarette machine, the connecting machine and the packaging machine need compressed air to drive each action, and the wire making equipment and dust removal equipment also rely on compressed air to operate.
There is a close relationship between air pressure and air volume, which affect each other and jointly determine the performance of the air compressor. The following is a detailed explanation of the relationship between air pressure and air volume of air compressor: definition of air pressure and air volume: air pressure: refers to the pressure of compressed air
The "6 cubic" in the air compressor is a parameter that indicates the amount of exhaust, which specifically refers to the air compressor in a unit time (usually per minute) that can discharge a gas volume of 6 cubic meters. This parameter is one of the important indicators of air compressor performance, for the selection
Due to the large and small parts of the air compressor, the common ones are: air filter, oil filter, oil core, lubricating oil, belt, solenoid valve, etc.; air compressor maintenance is divided into: overhaul and minor repair. Under normal circumstances, the overhaul of the air compressor is basically more serious
Today, with the highly developed automation of food enterprises, compressed air has been widely used. For some special processes in the food industry, compressed air may also come into direct contact with the product. Like some special chemical areas, the air may have been polluted, such
The oil-free air compressor realizes lubrication through the following two core ways to ensure the efficient operation of the equipment and the pure and oil-free output air: 1. The technical principle of self-lubricating material: The key moving parts (e. g. piston rings, cylinder walls) are made of special materials that rub against each other.
In production enterprises, air compressors are widely used in many industries because of their function of providing compressed air. The following are some types of production enterprises that mainly use air compressors: Machinery processing industry: Air compressors are widely used in the machinery processing industry.
In semiconductor production, the quality of compressed air has a crucial impact on the production process and product quality. For particle numbers of 0.1 microns, the specific requirements may vary depending on the production process and equipment. However, generally speaking, in the semiconductor production.
The frequency of water discharged from the air compressor tank depends on a variety of factors, including the frequency of use, the volume of the tank, the humidity of the production environment, and the industrial gas consumption of the factory. The following is a detailed analysis of this problem: 1. general principles Generally, air compressor gas tank
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
