2026-04-10Views：
The oil content of the discharge of a micro-oil screw air compressor usually contains 30 to 40 mg of oil per cubic meter of compressed air. However, this value may be affected by many factors, including the state of the oil core, whether the oil return line is blocked, and the pressure of the compressed air pipeline system.
If the oil core is damaged or blocked, the oil and gas cannot be effectively separated, which will cause a large amount of oil to be brought into the compressed air pipeline by the compressed air, which will increase the oil content of the exhaust gas. Similarly, if the oil return line is blocked, it will also cause the oil to fail to return smoothly, and then be carried into the system line by the compressed air. In addition, if the pressure of the compressed air pipeline system is low, the oil and gas separation may not be complete, which will also increase the oil content of the exhaust.
Therefore, in order to maintain the normal operation of the micro-oil screw air compressor and extend its service life, it is necessary to regularly maintain and maintain it, including checking the status of the oil core, cleaning or replacing the oil return pipeline, and maintaining the compressed air pipeline system The stability of pressure, etc. At the same time, it is also necessary to use high-quality lubricating oil and air filters to reduce oil consumption and the entry of impurities.
The main differences between oil-free air compressors and oil injectors are reflected in the lubrication method, the use environment and the application field. The following is the specific analysis: Lubrication method: oil-free air compressor: through the use of high molecular weight polymers or other oil-free lubrication
The service life of the air storage tank of the air compressor is affected by many factors, including but not limited to the tank material, design, use conditions, etc. These factors are analyzed in detail below and the general service life of the gas tank is given. Tank material: steel gas tank resistance
Industry production, construction sites and other gas points, gas fluctuations in the scene. The original single gas storage tank volume is insufficient, do not want to stop production to replace the expansion and transformation of the large tank scene. Production conditions that require high continuity of gas supply and require redundant backup.
When selecting an air compressor with a pressure of 6kg (about 0.6MPa), the specific model should be determined according to the actual gas consumption and application scenario. The common choice is a screw or piston air compressor with a range of 7.5kW to 30kW. The following is a specific analysis: 1. core parameters matching principle pressure horse.
The traditional air compressor needs to be refueled before use, while the water lubricated oil-free air compressor adopts water film lubrication technology, the main engine part does not need to be refueled, and only the motor part needs regular maintenance. The following is a specific analysis: Why do 1. traditional air compressors need to be refueled? Lubrication requirements: Traditional air compressors (e. g.
The 15kw oil-free screw air compressor performs well in many aspects. The following is a detailed analysis of its performance and characteristics: Performance: The 15kw oil-free screw air compressor adopts advanced screw compression technology and has efficient gas compression capacity. Its pressure is stable
The range of pressures that an air compressor can reach depends on the specific compressor type and design. In general, the common air compressor pressure range from a few bar to a very high several hundred bar are possible. The following is the general pressure of different types of air compressors
The single screw compressor consists of a cylindrical screw and two symmetrically arranged planar star wheels, which are installed in the casing. The screw groove, the inner wall of the casing (cylinder) and the star gear teeth form a closed volume. The power is transmitted to the screw shaft, and the star wheel is driven by the screw to rotate.
View details2.5m & sup3;/min What is the air compressor? For the gas demand of 2.5m & sup3;/min, it is necessary to select an air compressor with appropriate capacity to meet this demand. The capacity of the air compressor is usually measured in cubic meters per minute (m & sup3;/min) or cubic feet per
For a 22kW air compressor, the amount of compressed air that can be produced (usually measured in cubic meters per minute or cubic meters per hour) is not directly determined by the single factor of power. In fact, the displacement of the air compressor is also affected by many factors, including but not limited
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
