2026-04-10Views：
For medicine, food, semiconductor, chemical industry, fermentation and other industries, oil-free and clean compressed air must be the first choice. Oil-free oil-free screw air compressor, water-lubricated oil-free screw air compressor, oil-free scroll air compressor and oil-free centrifugal air compressor are common oil-free. Today, compare two types of oil-free screw air compressors-dry oil-free and water lubrication.
First:
the single screw water lubricated air compressor uses pure water for lubrication and cooling, and the internal parts combination of the body is made of special material medical grade stainless steel, which will never corrode.
Dry oil-free air compressor still depends on lubricating oil to cool, the body will produce oil smell.
Second:
the pure water of the water-lubricated air compressor system has been circulating in the system. The system will automatically change the water at a set time to ensure the quality of the water, and the operating temperature of the body is not higher than 50 degrees, so the water is not affected inside the body. And scale problems.
The operating temperature of the dry-type oil-free machine is very high, which exceeds 200 degrees, which directly affects the life of the cooling oil and the bearing.
Third:
the single-screw water-lubricated oil-free machine adopts imported special bearings, so there is no problem with direct water lubrication, high efficiency, low head noise, and few bearing combinations.
Twin-screw air compressors generally use FAG or SKF bearings, which are low-temperature bearings with short service life and high noise, and there are many combinations of double head bearings.
Fourth:
single screw water lubricated air compressor is directly sprayed with pure water in the body. Due to the high specific calorific value of water, the compression chamber is almost in the ideal state of isothermal compression and the compression process with the lowest energy consumption.
Dry-type oil-free cooling oil is about 100 degrees, the temperature of the compression chamber exceeds 200 degrees, and the temperature difference is relatively large, so the energy consumption is relatively high.
Fifth:
single-screw water-lubricated oil-free machine, the body and the motor are directly connected, the speed is low below 3000 rpm, there is no speed-increasing gear, the bearing life is long, and the maintenance cost is low.
The dry-type oil-free machine body needs to add a speed-increasing gear to the middle of the motor, because the speed is higher than 18000 revolutions, the speed-increasing gear needs to be increased, the bearing life is short, and the maintenance cost is high.
Sixth:
the water-lubricated air compressor uses water to cool the lubrication seal, the air quality is guaranteed, and the speed is about 3000 rpm. The temperature is about 55 degrees, and the maintenance cost is low.
The dry twin-screw air compressor uses oil to cool the bearings. The air quality cannot be completely clean and environmentally friendly. The two-stage compression speed reaches about 18000 rpm, which consumes labor and the temperature reaches about 200 degrees. It is unsafe and has high maintenance costs.
Which is better, single screw air compressor or twin screw air compressor? Let's analyze it. Principle: The single-screw air compressor uses a single-screw rotor to drive two symmetrically distributed star wheels to rotate, relying on the spiral groove and the inner wall of the shell to form a closed basic volume,
Shanghai Granklin Group is a production enterprise engaged in oil-free air compressors, screw air compressors, and water-lubricated air compressors. The water-lubricated screw air compressors produced by our company are sold at home and abroad and are widely praised by users. Bring more oil-free compressed air to all walks of life.
View detailsIf the condensed water of the air compressor is not discharged for a long time, the inside of the unit will rust and the lubricating oil effect will be reduced, which will affect the operation of the air compressor. In summer, the air compressor can also stop and start continuously. What is the basic principle? Air compressor condensate
Is it difficult to choose an air compressor for industrial use? Among the large air compressors, the "water-lubricated air compressor" produced by Shanghai Granklin Group can achieve 250KW power on a single machine. Industrial use of oil free air compressor choose it:
The competitiveness of domestic air compressors in the global market has become stronger and stronger in recent years, thanks to the upgrading of the entire domestic industry. In the past like to buy imported air compressor, different times more and more enterprises began to choose to buy domestic air compressor.
The reasons why the air compressor does not pump air are as follows: it has good environmental adaptability, and the operating cost is economical and the energy-saving effect is excellent. 1. The loose pressure valve of the air compressor is stuck, and the valve plate is deformed or broken. 2. Excessive carbon deposits at the inlet and exhaust ports. 3. No intake valve
Textile processing and production process, including proofing, marking, cutting, sewing and other processes, many of which need to use compressed air. Granklin oil-free air compressors have been in the textile industry for many years, helping to provide high-quality textile products, including high-pressure series air compressors.
When we choose an oil-free water-lubricated air compressor, in addition to conventional parameters such as displacement and power, we generally pay attention to its cooling method. Generally, there are two main cooling methods for an oil-free water-lubricated air compressor: water-cooled and Air-cooled, then these two cooling methods
When it comes to oil-free air compressors, we all know that the biggest feature of oil-free air compressors is that they do not need oil to work. The air compressed by oil-free air compressors will be cleaner. What places and fields can oil-free air compressors be used?
When the load of the air compressor inverter is too heavy, it will generate excessive current and a lot of heat, and sometimes the inverter will overheat alarm. Increase frequency conversion 1. The high temperature of the frequency converter of the permanent magnet frequency conversion air compressor causes the unit to stop alarming. Response measures check
View details
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
