2026-04-10Views：
Before the start of the 1. run
1. Check whether the valves of each part are in the correct position.
2. Check whether all protective devices and safety accessories are in good condition.
3. Check whether the lubricating oil level meets the standard.
2. operation steps
1. First press the "ON" button of the air dryer, and then let the air dryer run for more than 5 minutes. Observe whether the dryer is running normally and smoothly.
2. Press the air compressor "start" button (or "*" button)
3. Slowly open the exhaust valve until it is fully open.
3. shutdown
1. Press the air compressor "Stop" button (or "O" button)
2. Press the "OFF" button of the air dryer
3. Close the exhaust valve
4. Safety and Precautions
1. When the ambient temperature is close to 30 degrees Celsius, the exhaust fan should be turned on to reduce the indoor temperature.
2. When the indoor noise is greater than 90db(A) should wear protective earmuffs.
3. When the maintenance carefully check the power supply and the origin of the state, do not blindly touch to avoid safety accidents.
Domestic products such as: Shanghai granklin air compressor is not bad, the price of the whole machine is relatively cheap.
2. The problem of cost performance
mainly from the brand, purchase costs, maintenance costs, use costs up comprehensive.
You can refer to the above brand, combined with their own capital investment situation comprehensive consideration
The water-lubricated air compressor head produced by Shanghai Granklin Group is suitable for coalbed methane mining. The head of water lubricated air compressor has the characteristics of low temperature and high gas cleanliness, and there are many cases in process gas compression. Coalbed methane is a high-quality gas of modern clean energy. Coal mining all over the country is inseparable from water-lubricated air compressors to extract coalbed methane.
View detailsScrew air compressor consumes a lot of electricity in the whole factory. Guangzhou screw air compressor manufacturers can greatly reduce the cost of the factory by converting part of the consumption of screw air compressor into renewable energy. For example, the condensate recovery of screw air compressor, Guangzhou screw air compressor manufacturers collect the heat energy of screw air compressor through other equipment for everyone to take a bath, etc. This equipment is the condensate recovery equipment.
In an increasingly competitive industry, customers are often misled by lower air compressor prices and buy an air compressor with low price but poor quality. Here is a brief introduction to the relevant knowledge about the price of air compressor.
View detailsSingle screw air compressor and twin screw air compressor difference in the world, in addition to the micro compressor, in the power with air compressor, more than 70% for the twin screw air compressor. Compared with the single screw air compressor, the performance of the new machine is not much different, mainly reflected in the performance difference after a period of use.
Water lubricated air compressor routine maintenance costs, compared to the oil screw air compressor maintenance costs are much lower, why? As we all know, there is oil screw air compressor lubricating oil, a barrel of oil is very expensive, including labor costs, parts costs, or occupy a large enterprise expenses. The account is not unknown, the water lubricated air compressor only needs
Water-lubricated oil-free air compressor company direct sales of the whole machine: the water-lubricated compressor is produced for oil-free, and the whole machine uses stainless steel components and water as lubricant, so as to eliminate gas oil and mechanical work impurities from the source. To better products, better service dedicated to the user is granklin do oil-free air compressor core values.
View detailsThe first reason for the failure of the shutdown of the air compressor is: the exhaust temperature of the unit is high 1, and the lubricating oil level of the machine is low; Solution: Add oil to the 1/2~2/3 position of the sight glass. 2. The cooling fan is not working properly; Solution: Troubleshoot the fan
(1) To fully meet the gas consumption of gas equipment, the maximum gas consumption should be calculated according to the type and quantity of pneumatic equipment, and the gas consumption that may be increased in the future should be included, and then the air compressor that can meet the gas supply requirements of pneumatic equipment should be selected.
shanghai granklin group engaged in water lubrication oil-free screw air compressor production, research and development, sales. Permanent magnet variable frequency air compressor manufacturers, water lubricated air compressor manufacturers, variable frequency air compressor manufacturers, factory price direct national delivery, there are cases.
View detailsIt is best to use the original lubricating oil or the lubricating oil recommended and specified by the manufacturer. One is the oxidation resistance and thermal stability of compressor oil. For compressor oil, its oxidation resistance and thermal decomposition resistance can not only prevent oil thickening, deposition and sludge formation, but also extend the service life of compressor oil, thereby saving the high cost caused by replacement, shutdown and oil cleaning;
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
