2026-04-09Views：
There are significant differences in the working principle and oil content between the micro oil air compressor and the oil injection air compressor.
Working principle: The oil-injected screw air compressor uses oil to inject air to lubricate and seal the screw. While compressing the air, the oil enters the compression chamber directly through the nozzle, lubricating the surface of the screw and forming a sealing layer, which helps to protect the screw, reduce energy loss and reduce noise. The micro-oil screw air compressor does not need to be sprayed with oil. It uses special bearings and sealing materials to achieve bearing lubrication and air tightness. This method saves the cost of oil injection and also reduces the impact on the environment. Pollution.
Oil content: The oil content of the oil-injected air compressor is usually more than that of the micro-oil air compressor. This is because the oil-injected air compressor does not have a more detailed treatment of the exhaust, while the micro-oil air compressor is relatively better in this regard. However, it is worth noting that the air compressed by these two air compressors is essentially oily, but the amount of oil content is different.
In summary, the main difference between the micro-oil air compressor and the oil-injected air compressor lies in its working principle and oil content. When choosing which type of air compressor to use, the specific application scenario and the requirements for compressed air quality should be considered.
Fermenters do need to use compressed air, and its role is reflected in many aspects. The following is a detailed explanation: 1. provide oxygen The fermentation process, especially the fermentation of aerobic microorganisms, requires a large amount of oxygen as an energy source. Compressed air is injected into the fermentation tank.
Oil-free compressors are widely used in medical, pharmaceutical, food and other industries because they do not need lubricating oil and have high air cleanliness, but their special design also brings some common problems. The following are typical problems and solutions that users need to pay attention to: 1. common problems The temperature is too high
PPM is the abbreviation of "parts per million" (parts per Million), which means that the proportion of a substance in the total amount is one part per million, that is, the target substance contained in each million parts of the mixture. This unit is in the fields of science, engineering, medicine, etc.
During the operation of the air compressor, due to the impurities, moisture and other components in the air, it is easy to enter the air compressor oil, coupled with the catalytic effect of oxygen, moisture, and metal under high temperature and high pressure conditions, the air compressor oil will undergo oxidation reactions, resulting in oil Deterioration, and then various deposits
The water content of air compressor system is a complex and changeable problem, which is affected by many factors, including air humidity, compressor type, operating conditions and subsequent processing equipment. The following is a detailed analysis of the water content of the air compressor system: 1. air compressor system
Formal explanation on the replacement cycle of air compressor oil and gas separator In the compressed air system, the oil and gas separator is the core consumable, and its replacement cycle needs to be scientifically determined by comprehensive equipment working conditions, operating environment and maintenance level. After the comprehensive industry practice and technical specifications, now on the phase.
In the field of compressed air treatment, cold dryer and suction dryer as the key post-processing equipment, each play an irreplaceable role. The water-lubricated screw air compressor produced by Shanghai Granklin Group has become a star in this field with its unique environmental protection and high efficiency characteristics.
Biopharmaceutical enterprises have strict air quality requirements and need to meet core standards such as cleanliness, temperature and humidity, pressure difference, microbial control, air flow direction, etc. The specific requirements are as follows: 1. cleanliness level requires biopharmaceutical workshops to be divided into different types according to production process and product characteristics.
Incorrect refueling of the air compressor may cause a series of problems. The specific effects are as follows: Performance degradation: If the added oil is not suitable for the air compressor, it may have a negative impact on the performance. For example, the use of unsuitable oil may cause the operating temperature to be too high, which will
The oil content standard of power plant compressed air is usually set according to international standard ISO8573 or relevant industry standards. These standards ensure the quality of compressed air to meet the needs of the normal operation of power plant equipment. The following is about the power plant compressed air oil content
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
