2026-04-15Views：
The air compressor does not have to be equipped with a cold dryer. Whether it is equipped or not should be comprehensively judged according to the requirements of the air-consuming equipment on the quality of compressed air, the amount of air used and the environmental conditions.. The following is a detailed analysis of whether the air compressor needs to be equipped with a cold dryer:
cold dryer is a kind of air compressor post-processing equipment, its main function is to remove the moisture in the compressed air. Through the heat exchange between the refrigerant and the compressed air, the cold dryer reduces the temperature of the compressed air to the dew point temperature of 2~10 ℃, so that the water content in the compressed air tends to be supersaturated, and the liquid water is condensed and discharged to ensure The stability of production. This function plays an irreplaceable role in protecting industrial equipment, improving product quality and ensuring production stability.
The content of ppm in the air is the unit of gas concentration, that is, the abbreviation of "parts per million", which can be translated as "parts per million" in Chinese ". It refers to the proportion of a gas component in the air, specifically expressed per hundred
Whether the screw air compressor pump head needs to be refueled depends on the specific air compressor type and the manufacturer's recommendations. For most screw air compressors, the pump head (I. e. compressor head) needs to be filled with lubricating oil. This is because when the screw air compressor is working, the inside of the compressor head
As a kind of equipment that compresses air to provide power or other applications, industrial air compressor has a wide range of applications in many fields. The following is the main application areas of industrial air compressor: 1. Industrial production power source: air compressor for a variety of pneumatic tools, set
High-efficiency power frequency air compressor will produce air compressor wastewater during operation. Air compressor wastewater, also known as condensate or oil-water mixture, is mainly formed by the condensation of moisture in the air after being compressed. This liquid water will accumulate inside the compressor and in the exhaust pipe and pass through.
The air pressure requirements of the machining center usually vary according to the specific model and process requirements. However, in general, the air pressure of the processing center can be maintained in the following range: Common air pressure range: The air pressure requirements of most processing centers are usually maintained between 0.4 and 0.6MPa
Q: air compressor storage capacity to choose how many appropriate? A: according to the actual use of gas to reserve about 20%, choose air compressor and storage tank is better. The volume of the air storage tank should be between 10% and 20% of the exhaust volume of the air compressor. We generally choose 15% when
The parallel operation of two air compressors needs to be combined with intelligent control, load balancing and oil circuit management. The following are specific schemes and precautions: Core technology of 1. parallel operation 1. Intelligent control strategy PLC control system: Programmable logic controller (PLC) is adopted to realize self-control
Regarding the frequency of air compressor oil replacement, this is a problem involving multiple factors, including the type of air compressor, the use environment, the workload, and the manufacturer's recommendations. Generally speaking, in order to ensure the normal operation of the air compressor and extend its service life, regular replacement
Compressed air system equipment start-up sequence of technical specifications as the core power source of industrial production, the equipment start-up sequence directly affects the system operation stability and energy efficiency performance. Now on the cold dryer, air compressor, suction dryer standard start-up
The end-of-life time of a screw air compressor is not a fixed period, but depends on a number of factors, including the quality of the equipment, maintenance, workload, operating environment, and whether it is updated in a timely manner. If the screw air compressor has
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
