2026-04-15Views：
Technical note on conversion of pressure units
in the field of pressure measurement, "kg pressure" usually refers to kilograms of force per square centimeter (kgf/cm²), and the conversion relationship with megapascals (MPa) is as follows:
the conversion relationship
is based on the international system of units conversion standard:
1 kgf/cm = 0.1 MPa
specific calculation
for the pressure value of 5 kgf/cm²:
5 kgf/cm² × 0.1 MPa/kgf · cm² = 0.5 MPa
this conversion is applicable to conventional pressure unit conversion, and special conditions (such as high-pressure gas storage) shall be confirmed in combination with actual medium characteristics and measurement specifications.
The scale of air compressor manufacturers has gradually expanded. But after all, it is a kind of machine equipment, need to do regular maintenance work, so the next for everyone to talk about the maintenance cycle of air compressor.
Screw air compressor oil glue treatment methods mainly include the following: Cleaning method: First, you can try to clean the oil system to remove impurities and sediments. After cleaning, re-add new oil. This can effectively remove
answer: screw air compressor has many advantages, such as high stability, high efficiency, small vibration, low noise. The male and female rotors of the screw compressor and the cooperation between the rotor and the casing are set, so that the backflow of gas
The replacement cycle of the air compressor pipe filter element depends on many factors, including the use environment of the air compressor, air quality, running time, and the type and quality of the filter element. Usually, the manufacturer of the filter element will provide a recommended replacement cycle, which can be used as a reference.
The application of air compressor in the mining industry is very extensive and important, mainly reflected in the following aspects: drilling and mining: in the drilling process, compressed air can drive the rotary drill bit, its role is similar to that of the jackhammer, and improves the drilling efficiency. In addition, in mining operations
The difference between an oil-free air compressor and an oil-free air compressor: Structure: The structure of an oil-free air compressor is more complicated than an oil-free air compressor. Since the running parts do not use oil lubrication, in order to reduce the frictional resistance during compression, oil-free air compressors usually use specially designed rotors.
Air compressor, the name sounds very powerful, doesn't it? In fact, it does belong to a kind of power machinery. You can think of the air compressor as a "Hercules", which stores and provides energy through compressed air for our various
There are significant differences between screw air compressors and piston air compressors in terms of structure, performance, equipment management and noise. Structure: The screw air compressor is a box-type mechanism, which is easy to install and does not require redundant parts, and can be moved and handled flexibly. And the piston type
Factory air compressor conventional air pressure: In the factory environment, the conventional air pressure of the air compressor is usually determined according to the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is 5-13 bar (I .e. 500-1300 kPa or 72.5-188.5 psi)
The moisture content in the air is not a fixed value, but is affected by many factors such as temperature, humidity, geographical location and climatic conditions. Therefore, it is not possible to give a definite ppm (parts per million) value to express the moisture content of the air.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
