2026-04-09Views：
Q: Does the air compressor workshop need explosion-proof?
A: If the factory is flammable and explosive gas compression, not only the air compressor to do explosion-proof, air compressor workshop also need to do gas detection, no matter how careful in safety is necessary.
Shanghai Granklin Group reminds you that it is always right to use air compressors to compress flammable and explosive gases, and the potential safety hazard of gas leakage should be eliminated as far as possible.
Dry oil-free air compressor may have a variety of failures. The following are some common failures and their possible causes: High current: The host is malfunctioning. Exhaust pressure too high. The voltage is too low. Because the power of the oil-free air compressor is usually
There are significant differences between permanent magnet frequency conversion and power frequency air compressor in terms of working principle, efficiency, noise and energy saving. The following are the specific differences between the two and the power saving advantages of the permanent magnet variable frequency air compressor: 1. The difference between permanent magnet variable frequency and power frequency: Working principle: permanent magnet variable frequency
The operation of the screw air compressor for 10 hours is completely normal. In fact, the design of the screw air compressor is usually able to support continuous long-term operation. However, this does not mean that it does not need to be properly maintained and maintained. In order to ensure that the screw air compressor
There is no absolute answer to the question of whether the air compressor is oil-free, because it depends on the specific use scenario and needs. The following are some parameters of the oil-free air compressor for your reference: Advantages: High air quality: The oil-free air compressor does not have any during the compression process
The drainage of oil-free air compressor is an important maintenance step. The following are detailed drainage steps and precautions: Turn off the power 1. manual drainage steps: Before performing any maintenance operations, first make sure that the air compressor has been turned off and cut off the power. To ensure safety.
In the dust place, whether the air compressor room needs explosion-proof is an important issue. The following is an analysis of this problem: the risk of dust explosion: combustible dust can be mixed with air to reach a certain concentration under certain conditions (such as ignition source, etc.)
Screw air compressor oil glue treatment methods mainly include the following: Cleaning method: First, you can try to clean the oil system to remove impurities and sediments. After cleaning, re-add new oil. This can effectively remove
In the air compressor industry, permanent magnet frequency conversion technology is gradually becoming the mainstream trend of the market because of its high efficiency, energy saving and stable operation. Among the many manufacturers of permanent magnet variable frequency air compressors, Shanghai Granklin Group relies on its excellent technical strength and rich production experience.
When choosing which is more suitable for continuous operation between oil-free and oil-free air compressors, multiple factors need to be considered, including the working environment, use requirements, maintenance costs, and equipment life. The following is a comparison of two kinds of air compressor: oil air compressor: advantages
The traditional air compressor needs to be refueled before use, while the water lubricated oil-free air compressor adopts water film lubrication technology, the main engine part does not need to be refueled, and only the motor part needs regular maintenance. The following is a specific analysis: Why do 1. traditional air compressors need to be refueled? Lubrication requirements: Traditional air compressors (e. g.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
