2026-04-09Views：
Q: What are the oil-free screw air compressors?
Answer: There are two kinds of oil-free screw air compressors that can be seen on the market at present.
1, water lubrication oil-free screw air compressor, Shanghai granklin group production is this type of air compressor.
2. Dry oil-free screw air compressor.
Because we are the production of such products, so better understanding. There is no lubricating oil in the air compressor head, and water is used to provide lubrication and cooling measures for the air compressor head.
In the industrial production of medicine, electronics, chemical industry, microbial fermentation, blow molding, pressure detection and other industrial production and power stations, 0.3-4.0 MPa compressed air is needed. At present, the screw air compressor is being upgraded and replaced at home and even internationally. The screw air compressor has high working efficiency, low noise, low vibration, convenient maintenance, low operating cost and good air quality. At the same time, the series of machines adopt microcomputer control system, the machine is equipped with pressure, temperature, overload and other multiple protection performance.
Oil-free and micro-oil content of compressed air: In compressed air systems, the main difference between oil-free and micro-oil air compressors is the oil content in the compressed air they produce. Oil-free air compressor: oil-free air compressor in the design and operation process is not at all
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
In the lithium battery factory, the dryness of the compressed gas is extremely strict, and the pressure dew point usually needs to be controlled between -40°C and -70°C to ensure the safety of battery production and product quality. The following is a detailed explanation of this requirement: the core of the 1. dryness requirement refers
There are many reasons for the difficulty of starting the air compressor. The following are some possible reasons: Power supply problems: Low voltage, too thin wires or poor power supply contact may cause difficulty in starting the air compressor. Motor failure: The motor is the core component of the air compressor.
In the waterworks, the main uses of air compressors are concentrated in the four core areas of pneumatic equipment drive, pipeline maintenance and cleaning, water quality treatment assistance, and emergency standby air sources, as follows: 1. Drive pneumatic equipment Pneumatic valves are widely used in the waterworks,
Air compressor: an important part of mechanical power, non-special equipment Introduction: In the industrial field, compressed air is a widely used power source. The air compressor, as the key equipment for the manufacture of compressed air, plays an important role in many industries. However, off
Air compressors are widely used in many industries. The following are some major industries and their specific application scenarios: Industrial manufacturing: Automobile manufacturing: Air compressors are used for parts assembly, sealing, molding, and pneumatic tools (such as pneumatic Wrenches, pneumatic drills) power source
In the semiconductor industry, due to the particularity of the production process and the high requirements for air quality, oil-free air compressors are usually recommended. Oil-free air compressor can avoid the pollution of compressed air caused by lubricating oil, so as to ensure the stability of the production process and product quality
In the chemical water treatment system of power plant, the quality requirements of compressed air mainly focus on cleanliness, dryness, oil content, etc. The specific requirements are as follows: cleanliness requires dust particle size: dust particle size in purified gas should not be greater than 1μm to ensure compressed air
Air compressor room construction standards mainly include the following aspects: 1. room location and layout room in the general layout of the location should be left room for expansion to meet the needs of future development. The machine room should be far away from the explosive, corrosive, toxic gases and dust
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
