2026-04-13Views：
The specific value of the factory air source pressure is not a fixed value, but is determined according to specific application requirements and equipment specifications. However, I can give some common air pressure ranges for reference.
Generally speaking, the pressure of the air compressor station in the factory will be controlled at about 0.8 MPa to ensure that the air source pressure supplied to the equipment is between 0.6 and 0.7 MPa. This is a more general range, suitable for most pneumatic tools and equipment. However, in certain industries or applications, higher air pressures may be required. For example, industries such as papermaking, printing, and glass manufacturing may require gas pressures above 2.0 MPa.
In addition, for different gases, the pressure range will be different. For example, the pressure range for oxygen is usually between 0.5 and 10 MPa, for nitrogen between 0.2 and 1.0 MPa, and for hydrogen between 5 and 25 MPa.
In general, the size of the plant gas supply pressure mainly depends on the specific process requirements and usage scenarios. In order to ensure the normal operation of the equipment and the stability of the process, the factory usually adjusts and controls the air source pressure according to the actual situation.
If you need to know the air supply pressure of a specific plant or equipment, it is recommended to consult directly with the relevant plant or equipment manufacturer for the most accurate information.
Pharmaceutical companies use compressed air in multiple production processes and auxiliary systems, with a wide range of applications and strict air quality requirements to ensure the safety, effectiveness and compliance of pharmaceutical production. The following is a typical case of the use of compressed air in pharmaceutical companies and the specific
In industrial production, the temperature of compressed air is an important parameter. Taking the water-lubricated screw air compressor produced by the Granglin Group as an example, we can have a more specific understanding of the temperature of the compressed air in the factory. In general, the factory
Plating plants usually use compressed air in the production process, because compressed air can be used for a variety of processes and auxiliary operations. For example, it can be used to control agitation, spraying, pneumatic tools, and cleaning in electroplating baths. Shanghai Granklin Set
Oil-free air compressor is a special type of air compressor, its main feature is that it does not use lubricating oil during operation. Therefore, it produces compressed air is completely oil-free, especially suitable for gas quality requirements are very high occasions. Oil-free air pressure
The non-drainage of the air compressor may cause the following situations: The water content in the compressed air increases: When the air compressor is running, because the inhaled air contains water vapor, condensed water will form inside the machine after compression. If not timely drainage, these cold
The difference between non-oil machine and micro-oil machine: non-oil machine and micro-oil machine mainly refer to the amount of lubricating oil used and the degree of pollution to the compressed air during the operation of the air compressor. The following are the main differences between them: Use of lubricating oil: No oil machine: Gu
Oil-free air compressors or micro-oil air compressors are usually used in the following situations: places with high air quality requirements: such as hospitals, pharmaceutical factories, electronic factories, etc., it is necessary to ensure that the compressed air is clean and sterile to avoid contamination of products and equipment. Requires high purity
The screw air compressor can be operated for 24 hours. The air pressure is not enough to load automatically, the air pressure is enough to unload automatically, and the idle time exceeds the rated time to stop automatically, thus realizing unattended for 24 hours. Air compressor can insist on continuous work.
Oil-free compressors mainly use the following lubrication methods: Air lubrication: This method reduces the friction between machine parts by increasing the water molecules in the air. During operation, the oil-free compressor will produce water molecules in the compression chamber, and then benefit
Answer: The air compressor purchased by the hospital is used in the ventilator, medical pneumatic equipment, oxygen generator equipment, and dental use. Air compressors used in such environments, if the compressed gas
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
