2026-04-13Views：
The air compressor refers to "eight pressures", in the industry usually refers to its working pressure of 8 bar (Bar) or equivalently, 0.8 MPa (MPa). This is a common pressure level in industrial and commercial fields, and is suitable for a variety of basic applications, including but not limited to workshop air supply, pneumatic conveying systems, and automation equipment.
In summary, the "eight pressures" referred to by the air compressor, that is, 8 bar (Bar) or 0.8 MPa (MPa), is a pressure level widely used in industrial and commercial fields.
Open the drain valve of the air compressor, you can follow the following steps: Turn off the power 1. preparations: Before performing any maintenance operations, first make sure that the air compressor has been turned off and the power supply is cut off to prevent accidental startup and the risk of electric shock. Prepare the tool:
Whether the screw air compressor is a special equipment depends on the relevant regulations and standards of different countries and regions. In China, screw air compressor is listed as one of the special equipment. This is because the screw air compressor needs to compress the gas during operation.
The continuous working time of oil-free air compressor is a very interesting topic! Although it is called "oil-free", it does not mean that it can work endlessly! In fact, the continuous working time of the oil-free air compressor will be affected by many factors.
The size of the air compressor required by the factory depends mainly on the actual needs of the factory. The following are some key factors that determine the size of the air compressor: Process and gas flow requirements: The gas flow required by different processes varies. For example, light industrial plants due to gas
In order to avoid equipment performance degradation and discover potential problems in time, it is recommended that the standby air compressor be started at least once a week, and each operation time should be no less than 5-10 minutes. Such a frequency can not only ensure that the equipment will not age due to long-term non-use, but also can be found in time
Screw compressors, including the water-lubricated oil-free inverter screw air compressors of Shanghai Granklin Group, are usually not recommended to run idling for too long without load. Although idling for a short period of time (e. g. a few minutes) may not cause immediate damage, long
The maintenance cycle of an oil-injected screw air compressor usually depends on several factors, including the operating environment, workload, air quality and manufacturer's recommendations. Generally speaking, most oil injection screw air compressors need regular maintenance to ensure their performance and efficiency.
The water-lubricated screw air compressor and the water-lubricated air compressor of Shanghai Grankering Group are evaluated as follows: 1. Water-lubricated screw air compressor Features: Intelligent control: Equipped with intelligent controller, all operations and related data of the air compressor can be in the control panel
The operating specifications and precautions of the air compressor are the key to ensuring the safe operation of the equipment and extending its service life. The following are the operating specifications and precautions sorted out according to multiple authoritative sources: 1. the operating specifications Check and carefully read the operation of the air compressor before starting up
The maintenance frequency of the oil injection air compressor is a university question! Just like we have to do a physical examination on a regular basis, the fuel injection air compressor also needs regular "care" to maintain its health and vitality. So, why do oil injection air compressors need to be so frequent
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
