Factory blowing air pressure

The specific value of the factory blowing pressure will vary according to different application requirements and equipment specifications. The following is a detailed summary and point representation of the factory blowing pressure:

general Scope:

the standard air pressure of the factory compressed air is usually between 0.6MPa and 0.8MPa, which is considered to be the general requirements of most industrial equipment and systems.

For certain applications, such as heavy machinery, pneumatic fixtures or specific process equipment, higher air pressures may be required, sometimes reaching 1.2MPa or higher.

For lightweight applications, only lower gas pressures, such as 0.5MPa or less, may be required.

Specific application scenarios:

machining center: the air pressure of the machining center is generally 0.2~0.3MPa. When adjusting, you need to check the barometer, adjust the air pressure control valve, and gradually adjust it according to the specific situation until the blowing effect is the best.

Blow molding of glass products: For the blow molding process of glass products, due to the need to control the stability of the air pressure, a fully automatic control scheme may be adopted, so that the air pressure can be quickly and precisely controlled according to the set curve.

Other factory applications: For applications such as air blowing at the outlet of the press water tank and action cylinders, the air blowing pressure may be adjusted according to the specific needs of the equipment. For example, the pressure of the blowing pressure reducing valve of a small machine may be adjusted to 0.2 MPa, while that of a large machine may be adjusted to 0.25 MPa.

Note:

when selecting compressed air pressure, the relevant engineer or compressed air equipment supplier should be consulted to ensure that the work requirements are met and efficiency is maintained.

Need to pay attention to comply with national and industry standards to ensure safe production and product quality.

Adjustment method:

when adjusting the blowing air pressure, you need to check the barometer and control valve, and gradually adjust it according to the specific situation. At the same time, the angle and length of the blowing duct will also affect the blowing effect, which needs to be adjusted according to the actual situation.

In summary, the specific value of the factory blowing pressure needs to be determined according to different application requirements and equipment specifications. When adjusting, it is necessary to follow relevant technical guidance and safety standards to ensure the normal operation of the equipment and the smooth progress of production.