2026-04-10Views：
The main reasons why the screw machine is not suitable for flammable and explosive gases are as follows:
working principle and security risks:
the working principle of the screw machine is to compress the gas through the rotation of the screw. In this process, the gas is highly compressed and generates heat.
If a flammable or explosive gas is compressed, the compression and the heat generated may cause combustion or explosion of the gas, thereby causing a serious safety accident.
Effect of temperature and pressure:
the screw machine will produce higher temperature and pressure during the compression process.
Flammable and explosive gases at a certain temperature and pressure will become extremely unstable, easy to cause an explosion.
Therefore, the use of a screw machine to compress flammable and explosive gases will greatly increase the risk of explosion.
Equipment design and safety standards:
the design of screw machines usually does not meet the safety standards for handling flammable and explosive gases.
In order to ensure safety, special explosion-proof equipment requires special design and materials to prevent potential explosion risks. Ordinary screw machines do not have these special designs.
In summary, due to the working principle of the screw machine, the temperature and pressure changes generated, and equipment design considerations, it is not suitable for compressing flammable and explosive gases. The use of screw machines to handle such gases poses an extremely high safety risk. Therefore, when choosing compression equipment, a reasonable choice must be made according to the nature and safety requirements of the gas.
When selecting air compressors for multiple CNC machine tools, the following key factors need to be considered to ensure the stability and efficiency of air pressure supply: Demand assessment: First, the air pressure demand of each CNC machine tool should be clarified, including the maximum required air pressure value, average air consumption and
Air compressors are widely used and diverse in industry. The following is a detailed summary of their use and points: pneumatic tools and power: air compressors provide power for various pneumatic tools, such as pneumatic drills, pneumatic screwdrivers, spray guns, pneumatic wrenches, etc. This
Large oil-free air compressors are widely used in a variety of fields with high air quality requirements because they do not contain oil in the compressed air, including but not limited to the following: Electronic industry: oil-free air compressors can continuously provide clean compressed gas
When we discuss whether the air compressor is a power machine, we are actually exploring its essential attributes and functional characteristics. Power machinery, as the name suggests, refers to those mechanical equipment that can generate and provide power. They are able to convert all kinds of energy into machinery
In the field of modern industry, as an important energy conversion device, compressor is widely used in various gas compression and transmission occasions. Especially for the special field of coalbed methane, the demand of medium concentration coalbed methane compressor is increasing. At the same time, with the ring
The replacement cycle of air compressor oil is generally determined according to the type of oil. Specifically, mineral oil needs to be replaced every 3 to 4 months, while the replacement cycle of fully synthetic engine oil is relatively long. However, for semi-synthetic engine oils, the replacement cycle is usually between 5000 and
Suggestions for air compressor selection in food enterprises: oil compressors are at risk, and oil-free technology is more in line with safety standards. In the food production process, compressed air is used as a key power source and process medium, and its quality directly affects product safety and compliance. According to industry practice
The core of water removal is first condensation and then drying, and the core of oil removal is first separation and then filtration and adsorption. However, if the water-lubricated air compressor is replaced from the source, the oil problem will disappear directly, and you only need to concentrate on dealing with water.
There are significant differences between micro-oil and oil-free air compressors in terms of lubrication methods, compressed air quality, application scenarios, maintenance costs, and equipment structure, which can be distinguished by the following methods: 1. lubrication methods: core difference Micro-oil air compressor lubrication principle: Through the screw
Not all lathes need to be equipped with air compressors. Whether they are equipped depends on the type of lathe, the processing requirements and the degree of automation. The specific analysis is as follows: 1. the types of lathes that need to be equipped with air compressors and the automation requirements of CNC lathes (CNC): if CNC lathes need to realize self
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
