2026-04-09Views：
Permanent magnet variable frequency screw air compressor because of its high efficiency and energy saving, environmental protection and low carbon and other advantages, has become the new darling of the air compressor industry. It should be known that the permanent magnet frequency conversion screw air compressor is a permanent magnet motor made of rare earth permanent magnet materials. The rotor realizes rare earth permanent magnetization, no slip, no excitation, no fundamental wave iron, copper loss and less heat generation, reducing The loss of stator current and stator resistance. Its efficiency is 5% ~ 12% higher than the same capacity asynchronous motor. Its six characteristics are the "killer" of many ordinary air compressors ".
six major features
1. Energy saving
using high-efficiency and energy-saving permanent magnet synchronous motor, aiming at the wide adjustment range of permanent magnet frequency conversion, the new profile and exhaust port structure are applied to bring lower voltage drop and higher energy efficiency. Therefore, the permanent magnet machine can meet the national level energy efficiency standard regardless of full load or light load state.
2, efficient
the use of cost-effective frequency converter and vector frequency conversion technology makes the permanent magnet frequency conversion screw machine have small impact force, stable gas supply pressure, and can adapt to the grid voltage, thus greatly reducing the failure and maintenance of the equipment.
3, intelligent
efficient intelligent control system can continuously and accurately monitor the operation of the air compressor, and real-time feedback information, but also to achieve multiple host chain and remote control.
4, longer life.
Advanced valve design, intake adjustment range of 0~100%, capacity valve adjustment, pressure loss is small, stable action, longer life.
5. Large capacity
large capacity oil separator, superior quality oil separation original and gas, liquid filter elements, with advanced three oil and gas separation, oil content control more flexible, to ensure the high quality of compressed air.
6, high quality
avoid equipment operation failure caused by lubricating oil leakage caused by hose aging, and even cause bad accidents such as host lock.
The shutdown steps of air compressors and dryers may be slightly different for different models and manufacturers, but in general, the following general steps can be followed: Air compressor shutdown step: first stop the load supplied by the air compressor, which can be closed
In the busy world of industry, compressed air is like a powerful heart, powering various industrial processes. However, for those industries that have strict requirements for air quality, such as medicine, food production and precision manufacturing, the purity of compressed air
The comparison of oil-free and oil-free screw compressors can be carried out from the following aspects: 1. lubrication method Oil-free screw compressor: Lubricating oil is needed to lubricate the screw and sliding bearings during the compression process. After the lubricating oil is filtered and cooled
The maintenance cycle of the screw air compressor is not fixed, but is affected by a variety of factors, including the type of equipment, working environment, frequency of use and manufacturer's recommendations. The following are some general guidelines on the maintenance cycle of screw air compressor: 1. maintenance
2.5m & sup3;/min What is the air compressor? For the gas demand of 2.5m & sup3;/min, it is necessary to select an air compressor with appropriate capacity to meet this demand. The capacity of the air compressor is usually measured in cubic meters per minute (m & sup3;/min) or cubic feet per
There are significant differences between scroll compressors and screw compressors in many aspects. These differences are mainly reflected in the working principle, structural characteristics, performance performance, applicable scenarios, and maintenance requirements. The following is a detailed explanation of the difference between the two: How the 1. works
Twin-screw air compressor and single-screw air compressor are two different types of compressors, each with its own characteristics and advantages. The twin-screw air compressor is mainly composed of a pair of parallel, intermeshing rotors (screws), which makes it a rotary compressor.
Air Compressor Pressure and Flow Setting Mechanism and Implementation 1. Core Control Principle Air compressor can realize parameter setting through pressure regulating device and flow control module, but its control accuracy is closely related to equipment type. Specifically: Pressure control
Oil-free air compressors are widely used in many industries and fields, mainly due to their ability to provide high-quality, high-purity compressed air. The following are some of the main industries and fields where oil-free air compressors are applicable: Medical and health field: Because oil-free air compressors can
In the production process of electronic industry, the quality of compressed air has a vital impact on production efficiency and product quality, especially the oil content in compressed air. The electronics industry is extremely strict with compressed air because of the oil, particulate matter in the air.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
