2026-04-10Views：
Screw air compressor can work continuously without stopping, especially some specific models, such as water-lubricated oil-free screw air compressor, can run for a long time. When the pressure reaches the set value, the air compressor can automatically stop, and the permanent magnet variable frequency air compressor will run at low speed.
In addition, the screw air compressor is designed to work continuously for 24 hours, automatically load when the air pressure is not enough, automatically unload when the air pressure is sufficient, and automatically stop when the no-load time exceeds the rated time, thus realizing 24 hours of unattended.
However, although the screw air compressor has the ability to work continuously, it may cause damage to the equipment, shorten the life of the equipment and increase energy consumption. Therefore, although the screw air compressor can run continuously, it is recommended to reasonably arrange the downtime according to actual needs for necessary maintenance and maintenance.
This can not only extend the service life of the equipment, but also ensure its efficient and stable operation. At the same time, choosing an air compressor that matches the actual gas consumption can also effectively extend its service life.
The choice of oil or oil-free type of air compressor mainly depends on the specific application needs and environmental conditions. The following are the main features and applicable scenarios of the two types of air compressors: Oil air compressor: Lubrication and cooling: Use lubricating oil to lubricate mechanical parts
How long the air compressor is stopped depends on a number of factors, including the type of air compressor, the working environment, the load situation and the maintenance status. The following are some general guidelines: regular downtime rest: under normal circumstances, the air compressor in continuous operation
Air storage tanks are pressure vessels in special equipment, and their specific classification depends on the design pressure and volume. According to China's Special Equipment Safety Law and other relevant regulations, pressure vessels are generally divided into category I and II. A class of pressure vessels: usually referred
There are significant differences between oil-free air compressors and micro-oil air compressors in many aspects. These differences are mainly reflected in the working principle, compressed air quality, application field, maintenance cost and environmental performance. The following is a detailed comparison: 1. working principle of oil-free air compressor:
Oil-free air compressor, full name oil-free air compressor, is the main equipment in an air source device. It converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy, which is mainly used to compress air. The following is a detailed introduction to the function of oil-free air compressor: 1. core function
In the food industry, the quality requirements of compressed air are very strict to ensure the safety and hygienic quality of food. The following are some common food industry compressed air standards: Water content: The dew point temperature of compressed air must be lower than the dew point temperature of ambient air
Oil-free and oil-free compressed air, like two dancers with different styles, each shows a unique charm on the stage of compressed air. With oil compressed air, this "gorgeous dancer" dances with lubricating oil during compression. This
The oil content of the 1. is different. 1. Oil and no oil in the air compressor generally refer to the oil content of the gas discharged from the exhaust port of the air compressor. Generally, the oil content of the oil machine is larger. 2. The oil content of the oil-free machine is 0.01ppm, so use this oil content
The compressor of the variable frequency screw machine is variable frequency. Variable frequency screw air compressor is a common compressed air equipment in the industrial field. It is based on the working principle of screw air compressor, but has adjustable operating speed. Frequency conversion screw air compressor adopts frequency conversion
Screw air compressor in the loading state does not pump, there are a variety of possible reasons. First of all, it is necessary to check whether the air inlet of the air compressor is unblocked, because the blocked air inlet will prevent air from entering the compressor, thereby affecting its pumping ability. Secondly, the air compressor filter device, such as empty
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
