2026-04-10Views：
Oil-free air compressor, the name sounds reminiscent of the feeling of "refreshing, no burden", right? For this question, "oil-free air compressor can add some oil", in fact, the answer is hidden in its name.
The oil-free air compressor is designed to not add any lubricant in the process of compressing air. So, if we add oil to this "oil-free" environment, it is like suddenly introducing a new species into a balanced ecosystem-with potentially unknown impacts and consequences.
Moreover, after adding oil, the oil-free air compressor is proud of the "no oil pollution, pure gas source" characteristics may be affected. This will not only affect the performance of the air compressor, but may have a negative impact on the equipment and processes that use this compressed air.
Therefore, although the idea of "adding some oil" may sound tempting, for oil-free air compressors, we should respect its "oil-free" nature and do not try to change it easily. Just like we treat the natural ecosystem, maintaining its original balance and characteristics is the best choice.
Oil content ≤ 0.01 mg/m & sup3; The compressed air is very close to the oil-free state, but strictly speaking, it still belongs to the category of "micro-oil" and needs to be further judged in combination with specific application scenarios and industry standards. The following is a detailed analysis: 1. international standards for & l
The daily switch of the air compressor does have a certain impact on the machine, but the size of this impact depends on a variety of factors, such as the quality of the air compressor, service life, maintenance, etc. First of all, frequent switching opportunities to accelerate the mechanical wear of the air compressor. Every
How to set the parameters of Granklin air compressor? Why does the screw air compressor need to set a password? Because some relevant settings inside the screw air compressor need to be protected, and the factory settings cannot be changed at will. If non-professionals change the parameters, it will cause the operation of the air compressor.
Poor screw oil will cause the following problems: poor lubrication performance: cause insufficient lubrication of the host, accelerate the wear of parts, shorten the service life of the equipment, and even damage the host in severe cases. Reduced thermal conductivity: the heat absorption capacity decreases, so that the operating temperature of the unit increases. 1
The national standard of vibration value of screw air compressor may vary according to different models and specifications. Generally speaking, the general vibration range of the motor is within 3 channels (that is, less than or equal to 0.03mm). For specific screw air compressor models, such as 75k
Adjusting the pressure value of the air compressor needs to be operated according to the specific model and configuration of the air compressor. The following are general adjustment steps and precautions for reference: 1. adjustment steps 1. Find the pressure regulating device Pressure switch: Many air compressors are equipped with pressure
Question: What size of air compressor is needed per hour for 75 cubic meters of air volume? Answer: If the air volume required per hour is 75 cubic meters, then 1.25 cubic meters per minute. If the Granklin water lubricated air compressor is 11kw, the gas production of 8kg of conventional pressure can meet the requirements. Snail
Q: What are the maintenance contents of oil-free air compressor? Answer: Grantklin's water-lubricated oil-free air compressor, daily maintenance only needs to replace the air filter, water filter can be. The maintenance of oil-free air compressor mainly includes the following aspects: inspection and replacement of air
The pressure of the air compressor usually varies according to its type, specification and usage scenario. The following is a summary of the pressure range of different types of air compressors: 1. common air compressor pressure range low pressure air compressor: the working pressure of this type of air compressor
The oil-free level standard of air compressor mainly refers to the international standard ISO 8573-1, which classifies the oil content in compressed air in detail. In the definition of oil-free level, the main concern is that the oil content in compressed air must be very low to meet the requirements of air quality.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
