2026-04-10Views：
Whether the compressed air storage tank belongs to special equipment depends mainly on its volume and pressure and other parameters.
Generally speaking, all kinds of pressure vessels with volume greater than or equal to 30L and pressure greater than or equal to 0.1MPa (gauge pressure, the same below), including fixed containers and mobile containers for liquefied gases and liquids with a maximum working temperature higher than or equal to the standard boiling point, gas cylinders and oxygen chambers containing gases with a nominal working pressure greater than or equal to 0.2MPa and the product of pressure and volume greater than or equal to 1.0MPa · L, liquefied gases and liquids with a standard boiling point equal to or lower than 60 ℃ are all regarded as special equipment. This is because under these parameters, the equipment has a greater potential danger, once an accident occurs, it will have a greater impact on the safety of people's lives and property.
Therefore, if the volume and pressure of the compressed air storage tank meet the above conditions, it needs to be supervised and managed in accordance with the relevant regulations and standards of special equipment. This includes carrying out regular safety inspections, maintenance and upkeep to ensure its safe operation.
Please note that the specific regulations may vary by region and industry, so in practice, it is recommended to consult relevant professional bodies or local government departments for accurate information.
The main difference between air compressor cold dryer and suction dryer is reflected in their use and working principle. First of all, the air compressor cold dryer, the full name of the freeze dryer, the main purpose is to reduce the temperature of the compressed air. Its working principle is to use the principle of refrigeration
Regarding the application scenarios of air compressors in hospitals, according to the general specifications of the medical industry and the requirements of equipment operation, the following professional descriptions are made on their application fields and technical points: 1. Core medical equipment Power support life support system: ventilators, anesthesia machines, etc.
In the electroplating factory, the air compressor has a wide range of applications. Electroplating is a process that uses the principle of electrolysis to plate a thin layer of other metals or alloys on the surface of certain metals, and the air compressor plays a key role in this process, mainly providing compressed air. Electroplating
When the air compressor has serious coking phenomenon, the following measures can be taken to deal with it: 1. replacement of the oil and filter element First, the oil and filter element in the air compressor should be replaced immediately. As the coking substance may have seriously polluted the oil and filter element, it is necessary to replace the new oil and filter element
Can boot operation, can not rule out the problem is the motor. Host imbalance mainly includes: unbalanced power supply, large fluctuation of power supply, poor contact of a certain phase of contactor, and three-phase imbalance caused by motor problems. The final reason can only be known through investigation one by one.
Both oil-free scroll air compressor and oil-free screw air compressor belong to the air compressor of oil-free lubrication technology, and there are significant differences in the core principle, performance characteristics and application scenarios. The following from the working principle, performance comparison, application scenarios, selection recommendations four
The difference between water jet screw compressor and oil jet screw machine is mainly reflected in the lubrication and cooling methods. The following is a specific analysis: Working principle: Water jet screw compressor: The rotor is cooled by water jet cooling. When the compressor is working, water spray
The standard of oil-free air compressor mainly refers to the following standards: international standard: ISO8573-1: this standard specifies three main parameters of air quality, namely particle size, moisture content and oil content. Especially the oil content, which refers to the oil in the air
Answer: If the air compressor does not stop, it is necessary to check whether the pressure of the air compressor is normal, whether the pressure of the gas tank is normal, and whether the pipeline has any air leakage points. Whether the air consumption exceeds the air displacement of the air compressor, and the air compressor is used
The application of oil-free screw compressors in the field of gas transfer has attracted increasing attention. Its unique oil-free design and efficient gas handling capabilities make it stand out in many industries. Shanghai Granklin Group as a leader in the air compressor industry, its production of water run.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
