2026-04-10Views：
The air-cooled air compressor needs to be drained. Although the air-cooled air compressor mainly cools the air through the fan, a large amount of condensed water will be produced in the process of air compression. If this moisture is not discharged in time, it will affect the operation of the air compressor and may even cause equipment failure.
Therefore, for air-cooled air compressors, regular drainage is required to ensure the normal operation of the equipment. The specific drainage method and cycle may vary depending on the equipment model and the use environment. It is recommended to refer to the equipment manual or consult professional and technical personnel to obtain accurate information.
In addition, the ventilation and drainage of the air compressor room are very important. More than 50% of the failure causes of air compressors are related to ventilation and drainage. Therefore, in addition to regular drainage, it is also necessary to ensure that the air compressor room is well ventilated to prevent equipment overheating and failure.
There is a close relationship between the gas production and gas consumption of the air compressor. Gas production refers to the ability of the air compressor to continuously produce compressed air per unit time, usually expressed in cubic meters per minute (m & sup3;/min) or liters per second (L/s). Gas consumption, on the other hand, refers
The oil-free air compressor has high requirements on the cleanliness of the fuselage and the surrounding environment. Every time it runs for about 2000h, in order to eliminate the dust on the heat dissipation surface, the cooler purge hole cover on the electric fan bracket needs to be opened, and the cooler is purged with a dust blowing air gun until the dust on the heat dissipation surface is purged and clean.
View detailsBoth oil-free air compressors and oil-free air compressors have their unique advantages and disadvantages, and are suitable for different application scenarios. The advantages of the oil air compressor: the lubrication effect is good, which can effectively reduce the wear of mechanical parts and extend the life of the equipment. Good cooling effect, lubricating oil
Screw air compressor is a kind of compressed air equipment widely used in various industrial fields. According to its different characteristics, screw air compressor can be divided into the following types: according to the number of screw and working principle: double screw air compressor: this kind of air compressor adopts
The oil content of air, especially the oil content of compressed air, is an important index to measure the oil content in the air. The main units are as follows: 1. mg/m & sup3;(mg per cubic meter) mg/m & sup3; is a unit of absolute value, used to describe the unit
During the operation of the air compressor, if it is shown to exhaust every few minutes, this behavior is usually called "intermittent exhaust" or "periodic exhaust". This exhaust mode is not the continuous exhaust of the air compressor.
Two variable frequency air compressors to achieve simultaneous operation, usually can be achieved through the following ways: 1. master-slave control mode This is one of the most commonly used control methods. In this way, one of the frequency conversion air compressors is usually selected as the host and the other as the slave.
Air compressor is not necessarily frequency conversion. Air compressors are divided into two types: fixed frequency and variable frequency, each of which has different characteristics and application scenarios. Working principle of fixed frequency air compressor: fixed frequency air compressor uses a fixed power frequency to convert electrical energy into mechanical energy to drive compression
In the production of photovoltaic cells, the air compressor is the core equipment to ensure process accuracy and product quality, and its application runs through the whole process of silicon wafer processing, cell chip manufacturing and component packaging. The following analysis of its specific role and technical requirements from a professional point of view: 1. core process ring
The screw air compressor is a volumetric compressor, that is, a compressor that increases the gas pressure by compressing the volume of the gas. Regarding the water-lubricated air compressor of Shanghai Granklin Group, it is a screw air compressor that uses water as a lubricant. compared
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
