2026-04-09Views：
Why should 1. regular maintenance screw air compressor?
After the new air compressor is installed, it can be put into use. After running in the atmospheric environment for a period of time, the tiny particles in the air continue to accumulate, and the filter elements entering the air circuit and the oil circuit will be blocked, affecting the air quality and equipment Efficiency, so it needs to be maintained in time according to the original design requirements.
The general service life of the screw air compressor is relatively long, but if the screw air compressor is not maintained on time, considering the high cost of purchasing the air compressor, it would be a big mistake to spend money on maintaining the air compressor. Air compressor maintenance in place, can extend the life of the air compressor!
2. parts that often require maintenance.
When the screw air compressor is running, it will block the dust in the inhaled air in the filter to prevent the compressor from being prematurely worn and the oil separator from being blocked. Usually after 3000 hours or one year of operation, To replace the filter element, the energy-saving air compressor is placed in a place with relatively large dust, and the replacement time needs to be shortened.
Regular replacement of lubricating oil, lubricating oil can not figure cheap not according to the provisions of the replacement of lubricating oil, can not be mixed with different brands, easy to cause the quality of lubricating oil decline, lack of lubricity, affect the air compressor operation of the machine sensitivity at the same time cause high temperature shutdown.
The inside and outside of the cooler should be clean, and regular maintenance should be carried out, otherwise the cooling effect will be reduced.
The safety valve installed on the air compressor shall be checked at least once a year. The adjustment of the safety valve shall be carried out by professionals and the safety valve shall be maintained regularly, otherwise the normal operation of the safety valve will be affected.
3. screw air compressor maintenance matters needing attention.
1. Clean up the air compressor.
2. Ensure that the compressor unit has been cooled to prevent scalding and burning.
3. Turn off the power.
4. Open the vent valve, drain the pressure in the system, and keep the vent valve open.
5. Close access to air supply system.
The "oil-free" and "micro-oil" of the air compressor are two different lubrication designs, the main differences are reflected in the lubrication medium, compressed air quality, applicable scenarios and maintenance costs.
Gas compressor as a kind of mechanical energy into gas pressure power device, has a wide range of applications in many industries. The following are some types of companies that use gas compressors: 1. Manufacturing Automobile Manufacturing: In the automobile manufacturing process, gas pressure
Q: Why air compressor filter to regularly replace the filter? A: Because the filter continued to be contaminated, will lead to the flow of gas in the system becomes smaller and the pressure drop becomes higher, at the same time, the energy consumption of electricity is also rising. As a result, operations and production and costs are increased.
Oil-free air compressor common fault maintenance: 1, oil-free air compressor intermittent work, insufficient gas supply. The reason for this failure is: insufficient voltage. Starting from the buzzing sound, if the current running current is greater than 5: 00 a.m. (ordinary 520 watts and 840 watts without oil and air pressure
The size of the air compressor required by the factory depends mainly on the actual needs of the factory. The following are some key factors that determine the size of the air compressor: Process and gas flow requirements: The gas flow required by different processes varies. For example, light industrial plants due to gas
Compressed air ppm is a unit used to describe the content of trace substances (such as oil, moisture, etc.) in compressed air, specifically referring to the concentration of one part per million. In the field of compressed air, ppm is often used to express the oil content in compressed gas, that is, parts per million
In semiconductor factories, the pressure range of nitrogen is not a fixed value, but is dynamically adjusted according to specific process requirements and equipment configuration. The following is a detailed analysis of the nitrogen pressure range of the semiconductor factory: 1. the general range of nitrogen pressure Conventional process links:
On the nameplate of the air compressor, the three parameters of maximum displacement, pressure and temperature are all important indicators to describe the performance and working conditions of the air compressor, and there is a close relationship between them. Maximum displacement: It refers to the rated speed of the air compressor and a certain
Answer: Provide sufficient and clean air source for medical and health care equipment, such as dental equipment, oxygen generator equipment, ventilator equipment, surgical instruments, medical equipment, etc. Pharmaceutical companies use liquid systems in production.
The replacement cycle of the air filter of the air compressor is affected by the use environment, air quality, running time and other factors. The specific standards are as follows: the 1. routine replacement cycle General environment: 1000-2000 hours (calculated by running 8 hours per day, about 3-6 months). First maintenance: new machine
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
