2026-04-10Views：
The reasonable range of air compressor vibration value may vary according to different standards, equipment models and application scenarios. Generally speaking, the vibration value of the air compressor host can be regarded as normal within the following ranges: the horizontal vibration value does not exceed 0.2mm (base vibration), and the vertical vibration value does not exceed 0.3mm (spindle vibration). However, please note that these standards are mainly applicable to the main compressor types such as axial flow turbines or screw compressors, and are vibration measurements under normal operating conditions.
For more complex systems or multi-stage compressors, higher standards may be required. At the same time, the length of running time may also affect the vibration value. Therefore, for a specific air compressor, it is recommended to refer to the operation and maintenance manual provided by the manufacturer to understand and follow the vibration value regulations for this equipment.
In addition, there is also a view that the head vibration value of the air compressor should be less than 7.5 mm/s. This value may vary for different air compressor types or application scenarios.
In short, in order to ensure the normal operation of the air compressor and prolong the service life, the vibration value should be monitored regularly, and corresponding measures should be taken in time when abnormalities are found.
When discussing whether the compressor is good at power frequency or frequency conversion, we can make comparative analysis from many aspects: 1. air pressure stability and adjustment flexibility. The frequency conversion compressor is smoothly opened through the continuous speed regulation of the frequency converter, which is very good for the stability of air pressure.
In industrial production, air compressor as an important power equipment, widely used in many fields. In particular, 3-5kg air compressor, because of its high efficiency and energy saving characteristics, has become the new favorite of textile, glass, plastic and other industries. Produced by Shanghai Granklin Group
When the air compressor has serious coking phenomenon, the following measures can be taken to deal with it: 1. replacement of the oil and filter element First, the oil and filter element in the air compressor should be replaced immediately. As the coking substance may have seriously polluted the oil and filter element, it is necessary to replace the new oil and filter element
In general, the air pressure of the factory air compressor is generally 0.8Mpa, also known as 8kg pressure, and the specific value can be adjusted according to user needs. The unit of air pressure is "Pascal" (Pa), usually "bar" or "kg & rd"
The air compressor room of the food factory shall meet the requirements of site selection, environment, equipment layout, safety protection, air quality, daily management and other aspects. The details are as follows: 1. site selection and layout site selection requirements: a wide place with good lighting shall be selected, away from explosive,
The power of oil-free screw air compressor and oil-injected screw air compressor is not directly determined by its lubrication method (oil-free or oil injection), but by the specific design, manufacturing process and the performance of core components such as motors. Decided. Therefore, it cannot be simply said
In the semiconductor industry, the indicators of compressed air (CDA, clean and dry air) need to meet extremely high purity, stability and specific process requirements. The following are key indicators and analysis: 1. core cleanliness indicators Particulate matter control standard requirements: compressed air needs to be strictly limited
As a heavy industry, the iron and steel industry has extremely strict requirements for air compressors, which need to meet the needs of complex working conditions such as high temperature, dust, and high load. The following is a professional analysis of four dimensions: technical performance, operational stability, environmental compliance and maintenance convenience.
Screw compressor and scroll compressor which is good? Screw compressor and scroll compressor have their own advantages and disadvantages, suitable for different applications. The following are some comparisons between them: Efficiency: Screw compressor: Usually in the middle and high
The difference between an oil-injected screw air compressor and a dry screw air compressor is mainly reflected in the following aspects: Lubrication method: The oil-injected screw air compressor will inject lubricating oil through a special system during the compression process and mix with the compressed gas. In order to lubricate the screw,
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
